Light Oil Burner
MTL/B type burner adopts the world's advanced combustion technology and is a mechatronics fully automatic split fuel burner manufactured with reference to international and domestic standards.
Introduction
MTL/B type burner adopts the world's advanced combustion technology and is a mechatronics fully automatic split fuel burner manufactured with reference to international and domestic standards. Light oil burners are widely used in steam boilers, hot water boilers, heat transfer oil furnaces, direct-fired lithium bromide air conditioning units, air heating furnaces and other industrial furnaces.
Technical parameters
Model | MTL1050/B | MTL1400/B | MTL1750/B | MTL2100/B | MTL2450/B |
Capacity (MW) | 16.6 | 21.35 | 26.09 | 33.21 | 37.95 |
Fuel | Light oil | ||||
Power supply | 380V 3/N/PE 50HZ | ||||
Regulation mode | Slide two-stage or proportional control | ||||
Sequence controller | LAL2.25/LGK16** | ||||
Ignition transformer | 2×7000V | ||||
*The viscosity of light oil is 6cSt (1.5ºE)
**For burners that operate continuously
Product Features
The fuel quantity of this type of burner changes continuously. If the control system is equipped with a load proportional regulator, it becomes a continuous proportional adjustment, and when it is not equipped with a load proportional regulator, it is a two-stage sliding mode.
Installation Dimensions
MTL1050/B | MTL1400/B | MTL1750/B | MTL2100/B | MTL2450/B | |
D1 | φ595 | φ650 | φ680 | φ780 | φ800 |
D2 | φ660 | φ720 | φ720 | φ842 | φ842 |
D3 | φ560 | φ620 | φ660 | φ730 | φ770 |
L1 | 350 | 360 | 360 | 350 | 350 |
L2 | 1660 | 1800 | 1790 | 1940 | 1940 |
L3 | 800 | 833 | 860 | 860 | 900 |
H1 | 850 | 900 | 950 | 1000 | 1000 |
H2 | 1345 | 1384 | 1490 | 1544 | 1544 |
A×B | 440×690 | 500×760 | 540×780 | 600×850 | 610×850 |
MTL/B series fuel burner performance characteristics
● Fully automatic operation, suitable for a wide range of power
● Fully automatic operation, the burner is automatically controlled from flameout protection, oil inlet and return pressure protection, wind pressure protection, load regulation, furnace purge and other processes
● Pre-purging the furnace
● Safe flame monitoring system
● The geometry of the burner flame can be adjusted
● According to the requirements, the corresponding parts can be adapted to high temperature combustion air below 250℃.
● Easy to install, debug and maintain
● Siemens LMV electronic proportional adjustment system (optional)
● Feedback adjustment of flue gas oxygen to achieve energy saving (optional)
● Environmental protection standard, ultra-low emission (optional)
Product Application
Hot Tags: light oil burner, China, suppliers, manufacturers, factory, custom, price, cheap, OEM, for sale, made in China, Industrial Gas Fired Burner, natural furnace gas burner for boiler, Oil Gas Burner, industrial energy saving burners, Oil and Gas Dual Fuel Burner, Industrial Burners
Send Inquiry
