Precaution for Industrial Burner Installation

Precautions for Industrial Burners Installation

What should we pay attention to when installing industrial burners? the
1. Electrical wiring
2. For the sake of safety, the installation must be effectively grounded and installed in accordance with the requirements of current safety regulations;
3. It is very important to meet all security requirements. If in any doubt, please have a qualified person carefully check the electrical wiring;
4. The manufacturer shall not bear any responsibility for equipment damage caused by improper grounding;
5. The inspector must check the system to ensure that the power indicated on the nameplate can be provided for the equipment;
6. The power provided can be completely accepted by the installation;
7. It is not allowed to use adapters, multi-output sockets and/or extension cables to connect the device to the main power line;
8. According to the current safety regulations, use a separate switch to connect the installation to the main power line;
9. When using electric equipment, there are some basic common sense;
10. Do not use wet or watery parts of the body, or bare feet to touch the installation;
11. Do not drag the wires; do not expose the installation to the outdoors (rain, sunlight, etc.) unless explicitly requested to do so;
12. Do not let children or inexperienced personnel use the equipment;
13. The installed input wire cannot be replaced by the user himself. If the wire is damaged, please turn off the equipment and contact qualified personnel to replace it. If the installation needs to be stopped for a period of time, the power switches of all electric equipment (such as pumps, burners, etc.) in the system should be disconnected. Burn gas, or other fuels.www.burners-china.com