The combustion process of the Boiler Burner

Adjustment of the valve size during the combustion process of the Boiler Burner Equipment

During the combustion process of industrial burners: How to adjust the size of the damper

The damper of the industrial burner mainly adjusts the air intake size and controls the combustion. The damper is used to adjust the air volume entering the burner, which is directly related to the combustion effect of the burner. There are three methods for adjusting the damper of methanol fuel burner (hydraulic cylinder damper) Except for reasons not suitable for methanol combustion)
1. Manually adjustable damper
Low-nitrogen Boiler Burners All methanol burners with single-stage control adopt manually adjustable dampers. First loosen the fixing screw on the damper, and adjust the opening of the damper according to the amount of methanol sprayed, so that the combustion air is consistent with the amount of methanol sprayed. match, and then tighten its fixing screws. ​
2. Servo motor adjustable damper
The second mode of damper for low-nitrogen burners is the servo motor-adjusted damper, which uses the rotation angle of the servo motor to control the opening of the damper. ​
Clutch button: When pressed, the cam and the shaft are separated. After the setting is completed, press it again and pop up, and the cam and the shaft are combined.
1. One-stage fire air damper adjustment cam;
2. Two-stage fire air damper adjustment cam;
3. Two-stage fire solenoid valve action cam;
4. Fully closed, that is, the air door opening when the machine is stopped.www.burners-china.com