The operation of industrial burners is more reasonable
Dec 22, 2022
Press the main ignition button on the industrial combustion control panel. After the main fire working indicator light is on for 10 seconds, confirm that the main fire has been ignited. If the main fire indicator light goes out within 10 seconds, the combustion failure alarm buzzer on the combustion control panel will sound, indicating ignition failure; after 60 seconds, manually press the fault reset button of the programmer to restart the main ignition button. After the main fire is ignited normally, the operator can confirm whether the main fire is ignited through the observation hole of the burner. After confirmation, press the high fire start button on the burner control panel. After a delay of a few seconds, after the high fire work indicator light is on, the operator in front of the furnace should slowly open the load regulating ball valve, and increase the gas auxiliary air in proportion until the flame is mainly blue or reddish.
