What are the steps to use industrial burners

There are many types of industrial burners, including oil burners, oil burners, gas burners, gas burners, oil and gas dual-purpose burners, heavy oil burners, heavy oil burners, waste oil burners, and fully automatic burners. So what precautions should be taken during the use of these burners?1. When using industrial burners, pay attention to the inspection before the commissioning of the gas burner:

1. Check whether the gas is in place, whether the gas pipeline is clean and clear, and whether the valve is open.

2. Deflate and empty the pipeline in front of the gas valve to ensure that there is no mixed air in the pipeline, and the exhaust pipe should be connected to the outside.
3. Whether there is any pipeline leakage and whether the pipeline installation is reasonable.

Industrial burners should pay attention to the internal inspection of the gas burner

1. Whether the combustion head of the burner is installed and adjusted.
2. Whether the external circuit connection meets the requirements.
3. Perform cold simulation of the burner according to the line condition, and observe whether the various components of the equipment in operation are normal and whether the flame detection protection part is normal.
4. Whether the direction of motor rotation is correct.