Industrial burner cleaning solution
Feb 26, 2024
SWT Burner organizes industrial burner cleaning solutions for you:
1. Clean industrial burner parts
a. Remove the scale on the flame stabilizing plate and open the gaps. Remove carbon deposits from the electrodes.
b. Use carburetor cleaning agent to clean the fuel injection nozzle, nozzle, oil pipe, and oil suction pipe. If there is scale on the walls of the oil pipes and oil suction pipes, use a purge to clear them. Check whether the O-ring is intact and replace it if necessary. Do not use carburetor cleaner to clean the O-ring.
c. Clear the grease on the heating wire and temperature sensor. Remove the sludge from the bottom of the heated oil pool. d. Clean the filter tank and filter screen. Drain the oil in the oil storage tank, remove the sludge at the bottom, and clean the oil tank.
2. Assemble in reverse order of disassembly. When installing the electrode, pay attention to the gap between the electrode (2.5mm) and the gap between the electrode and other components. (Cannot connect the iron) After the assembly is completed, add oil to the heating oil pool to the liquid level mark, and then install and use it. (The above protection and maintenance work for the burner should be carried out once a year.)
3. Routine maintenance of industrial burners
3.1. Clean the flame stabilizing plate (cleaning takes 3 to 15 days according to the cleanliness of the fuel oil and the usage rate of the burner). Method: Remove the burner and clean the flame stabilizing plate with carburetor cleaning agent to remove carbon deposits and coking. The gaps in the disk are clear. Also, check the ignition electrode gap (2.5 mm). Gaps between electrodes and other components. (Cannot take the subway)
3.2. Clean the fuel injection head and oil pipe (clean once every three months) Method: Use high-pressure air to blow at the fuel injection nozzle to clear the oil path. (Do not use carburetor cleaner to clean the fuel injection nozzle) 3.3. Clean the filter, photoreceptor, and oil spill tank (clean in time according to usage).www.burners-china.com
