Precautions for the operation and use of the burner

What are the precautions for the operation and use of industrial burners?

Let's take a look at it together:
1. When the burner fails to ignite once, stop immediately to check whether the gas supply system of the burner is normal and whether the circuit connection is correct, etc., and restart the incinerator after troubleshooting. 2. The gas supply pipeline should prevent impact or collision with wrenches or metal objects to prevent gas explosion caused by static electricity or sparks. the
3. Stop smoking, welding, cutting and other illegal operations on the gas supply valve group or pipeline and flange surface. the
4. Stop any open flame testing near piping, manifolds, and pressure regulators. the
5. Test whether there is gas in the gas supply pipeline, usually use a gas low pressure gauge. the
6. In the gas supply pipe, even if it has been emptied, there are still gas or liquid droplets on the pipe wall. If static sparks and open flames are present, it can also cause incineration and explosion. Therefore, no maintenance or hot work should be performed until it has been completely cleaned and replaced. the
7. When the gas supply pipeline is ventilated, the valve group or the burner fails, it is necessary to close the main valve in front of the valve group first, then empty the gas in the pipeline from the main valve to the valve group, and then disassemble and repair the valve group. the
8. Stop using electric (gas) tools and electric tools without explosion-proof function on site. the
9. Stop manual operation to run a component or a program. the
10. Check the burner at any time to keep the shell clean.

www.burners-china.com