Standard Operation of Boiler oil burners

What are the standard operations of oil burners? The light diesel oil used must be cleaned, please pay attention to the timely cleaning of the fuel tank and oil filter; under normal working conditions, replace the oil nozzle once a year, and replace the elastic coupling and the rubber parts on the coupling once a year; prevent foreign matter from entering air duct. The application part of the fuel burner should be kept away from inflammable and explosive materials, and should be equipped with rescue equipment, and the oil pressure should be properly adjusted according to the indicated value of the oil pressure; the combustion pipe, impeller, flame detector and ignition electrode should be checked on time to eliminate oil pollution and carbon deposits. In particular, flame detectors should be kept clean and free of water; when protecting oil burners, power must be plugged. Before using the oil burner, clean the combustion boiler of residues, add new biomass pellet fuel, and close the tank lid. Before starting operation, check all electrical circuits and water pipes for abnormalities such as leaks or damaged circuits. Check the water pipes for leaks to avoid leaks. Check whether the cooling water in the water tank is full, and then open the fuel engine cooling valve to adjust the air supply. The dosing system is recommended to gradually increase the amount of biomass pellet fuel. The entire process will take three to five minutes. The whole process is to ensure that the fuel burner is energy-saving and environmentally friendly. Only when the biomass burner is operated in strict accordance with the operating instructions can it be adjusted to ensure that the fuel burner can fully burn and play a great role.

www.burners-china.com