The working process of industrial burners

The working process of the burner of the industrial burner accessories

Industrial Gas burner accessories are an important part of the burner. The following content will briefly discuss the working process of the burner of the burner accessories. the
1. Boiler liquid level, temperature or pressure check. the
2. Check gas pressure, air pressure and residual fire. Check the fuel tank storage level when the fuel is diesel. Whether the oil pipe and oil pump have been filled with oil. the
3. Leak detection stage of gas valve group: check whether the gas valve is airtight. the
4. Purge stage before pre-blast: fully open the air door, purge the furnace, eliminate the residual gas in the furnace, and supply oxygen to the open hall to facilitate the ignition process. the
5. Wind pressure detection: to ensure the normal operation of the blower. the
6. Ignition stage: The damper of the burner accessories is closed to the ignition position, and the ignition transformer and ignition valve are opened to implement automatic ignition. the
7. Confirm that the ignition flame is established. the
8. Open the damper to the main fire position, open the main gas valve, and set up the main flame. the
9. Close the ignition valve and confirm that the main flame is established. the
10. According to the temperature or pressure control instrument, the size of the fire is converted or the size of the flame is adjusted in proportion.

www.burners-china.com