Air adjustment of the oil fired hot water boiler burner

What should be paid attention to when installing the air adjustment of the oil-fired hot water boiler burner?

The air adjustment installation of the sliding type oil-fired hot water boiler burner:

1: Principle of air and oil adjustment: The cam mechanism of the Oil Boiler Burners rotates clockwise to the high fire position under the drive of the servo motor, which can adjust the spring belt, drive the damper baffle connector and open the damper as a front purge.

In the late stage of the front purge, the servo motor drives the cam plate to open the oil quantity adjustment valve, so that the damper baffle rotates to the ignition load position. In this position, the oil quantity regulator is fully open, which means that only a small part of the oil is atomized in the nozzle, and most of it flows back to the oil tank through the return oil pipe.

2: Air volume adjustment: By adjusting the sliding screw on the adjustment mechanism, the air damper opening is driven, and the smoke composition is measured at each load point to make the air volume suitable for the oil volume. After the above adjustment is completed, the outer locking screw should be tightened.
3: Oil volume adjustment: Use an Allen wrench to turn the Allen screw to make the eccentric steel sheet convex or concave, and use the eccentric steel sheet to push the oil volume regulator to achieve the purpose of oil volume adjustment. The air and oil adjustments should be carried out in harmony.
If you want to know more about Furnaces Oil Burner Installation methods, please contact SWT Burner for more consultation. Our professional technical team provides you with 7*24 hours online service.www.burners-china.com