Industrial burner flameout protection equipment

Composition of industrial burner flameout protection equipment

Composition of industrial burner flameout protection equipment Flameout protection equipment generally consists of three parts: flame detection, replacement and expansion, and actuator. ​

(1) The mission of the flame detection part is to detect whether the flame exists on the burner (main fire and small flame). When the flame subsides, it can automatically generate a signal. The principle of flame detection is based on certain characteristics of fuel burning. ​
(2) Replacement and amplification The signal measured by the detection element is generally weak and not enough to directly drive the actuator. Therefore, the replacement and amplification part is to amplify or replace the signal sent by the detection element to drive the actuator. ​
(3) This part of the actuator converts the modified and amplified signal (a few may not be amplified) instructions into specific actions according to different requirements, such as opening or closing valves, etc. 3. The classification of flameout protection equipment is based on the different detection principles of detection components. Flameout protection equipment mainly includes bimetal reed type, thermocouple type, photoelectric type and flame conductive type.www.burners-china.com

​