Possible causes of gas burner failure

The burner starts normally, but the operation is interrupted during the "blowing program", and the control box lights up the fault light. the
Possible Causes:
(a) It may be a malfunction (damage) of the industrial gas burner control box. the
(b) The air pressure switch does not work, the air pressure switch is damaged, and the contact cannot act when the air pressure reaches the set value. The air pressure port or the pressure measuring tube is blocked. Check the set value of the air pressure switch to see if it is set correctly. The fault caused the wind pressure to be too low.

www.burners-china.com