Troubleshooting method of industrial burner not starting

Industrial burner does not start fault Press the start button for a long time the burner does not start

1. External interlocking failure The external temperature or pressure control has not reached the lower limit of startup; check the temperature or pressure setting.

2. When the internal interlock of the industrial burner fails to pass the air pressure is too high or too low, when the air pressure switch is normally closed and not closed, when the air valve mechanism is not in place, it will appear, and check it gradually.

3. The fault of the program controller has not been reset, and reset it again.

4. Fan motor overheat protection, reset the thermal relay.

5. Check the start button of the control cabinet to see if it is normal.

6. Circuit fault The circuit is checked to check whether the start signal is normal and whether the voltage insurance is normal.

www.burners-china.com