Treatment method of industrial burner flameout failure

Industrial burner flameout failure When the burner is running and burning normally, it suddenly extinguishes the fire, which is a flameout failure.

1. After the unstable gas source causes the flame of the industrial burner to fluctuate, extinguish the fire and deal with it; adjust the pressure and restart.

2. When the flame detector of the industrial burner fails, the flame detection probe is grounded, or when it is too dirty, the normal flame cannot be detected, and the flame is extinguished. Treatment method; adjust the probe position and clean the probe surface. Restart.

3. Circuit failure The power supply is unstable or lacks phase, resulting in flameout during the process. Treatment method; contact an electrician to check the power supply and wiring.

www.burners-china.com