Welding work on industrial burner fittings

Industrial burner accessories are often an important part of a machine. If a group of machines lacks one accessory, it may be useless. Each part has its own value and function, even a small screw is missing. One is not necessary, don't look at it as small, but without it, it will not be fixed, and it will not be safe to use if it is not fixed, so accessories are very important, but accessories are also very important, and its welding work is more and more important. Things to watch out for.

The furnace tube of the burner accessories and the furnace box and pipeline of the accessories should be connected by welding. Only when the furnace tube and the furnace pipeline are welded can it be more stable. It should be noted that the heated part should be connected by butt welding, and it must be grounded in an arc shape, so as to conform to the overall structure of the accessory. When welding the local edges and corners of the welding parts, the roundness of the welding place should be maintained, and some small defects should not appear, otherwise these will easily cause operational failures and hidden safety concerns during use. the

These are the main points to pay attention to in the welding work of burner accessories. There are hidden dangers to safety when doing these things, so everyone should pay more attention.

www.burners-china.com